
Home / Plumbing Services / Sinks
Sink Repair & Installation in South Florida
Kitchen, bathroom, and utility sinks. Leaks, drips, low pressure, drain assemblies, faucet swaps, and full sink installs. All from one licensed in-house plumbing crew.
Sink repair, faucet swaps, and new sink installation across South Florida
A sink that drips, pools water in the base cabinet, or drains slowly is one of the most common plumbing calls we run. In most cases the fix is fast: a faucet cartridge, a supply-line swap, a p-trap reseal, or a strainer basket replacement. However, some calls point to a bigger issue upstream (worn shut-off valves, corroded p-traps, or a sink that has simply reached the end of its lifespan). Total’s plumbers carry the parts for the mainstream faucet brands and sink types on the truck, so most calls finish on the first visit.
What’s Going On With Your Sink?
Below, you’ll find the everyday sink problems we fix, the sink and faucet brands we install most in South Florida, and above all, how Total generally decides between a sink repair and a full sink replacement.

Common Sink Leaks and Faucet Problems
As a rule, the sink is one of the highest-use fixtures in the home, so wear is normal. In particular, catching a small drip or drip-prone fitting early keeps it from turning into a base-cabinet water-damage call later. Below are the sink and faucet issues we fix most often.
Most commonly, a worn supply-line washer, a loose p-trap slip nut, or a failed shut-off valve. In practice, we pressure-test, isolate the source, and replace only the failed component so the whole assembly isn’t rebuilt unnecessarily.
Typically a worn cartridge, o-ring, or seat inside the faucet body. In addition, hard water buildup can freeze the cartridge over time. Fortunately, most brand-name faucets have a replaceable cartridge, so a repair is often cheaper than a full swap.
Often a clogged aerator (the screen on the tip of the faucet), a mineral-clogged supply line, or a partially closed shut-off valve. As a rule, we start at the aerator and work upstream from there.
Sink Drain, Basin, and Smell Problems
Meanwhile, some sink calls have less to do with a faucet or supply-line fitting and more to do with the drain or the basin itself. Below are the sink issues we see on this side of the fixture, along with the fixes we generally recommend.
Typically the p-trap or the branch drain has caked with grease, hair, or food debris. In addition, on kitchen sinks the garbage disposal or dishwasher drain line is often the actual choke point. See our drain cleaning and garbage disposals pages for related issues.
Small chips on porcelain or enamel are cosmetic and generally not a repair call. However, a crack through the basin means the sink is at end-of-life and needs replacement. Meanwhile, stainless and composite basins rarely crack; instead, they dent or scratch.
Usually a dried-out p-trap (letting sewer gas up) or built-up biofilm on the drain walls. In practice, running water through the trap or a professional drain cleaning handles most cases.
Sink Types We Install
Overall, Total installs every mainstream residential sink style. In practice, the right choice depends on the countertop, the existing cutout, and how the sink is used day-to-day.
Kitchen Sinks
Single-basin, double-basin, farmhouse (apron-front), undermount, and drop-in configurations. Materials include stainless steel, granite composite, fireclay, and enameled cast iron. In practice, undermount stainless in 16 or 18 gauge is the most common install in South Florida homes.
Bathroom Sinks
Vessel, undermount, drop-in, pedestal, and wall-mount styles. Materials include porcelain, vitreous china, glass, and stone composite. Notably, undermount and vessel sinks tend to dominate current bathroom remodels; pedestal and wall-mount remain popular in powder rooms.
Utility & Laundry Sinks
Free-standing and wall-mount laundry tubs, plastic or fiberglass, with pull-out or high-arc faucets. Additionally, we handle utility-sink installs in garages, workshops, and pool-equipment rooms across South Florida.
Sink Faucet Brands We Repair and Install
Total repairs and installs every faucet brand. In practice, we keep parts and full units for the most-common brands frequently in stock so most cartridge swaps and faucet replacements finish same-day. Meanwhile, anything less common is a quick special-order.
Frequently in stock
Special-order or bring-your-own
Not sure what brand your existing faucet is? As a rule, we can identify it on-site from the escutcheon plate or cartridge shape and match parts to what’s already installed.
Sink Repair vs Replacement
In general, most residential sinks last 15 to 30 years depending on the material and how they’re used. Below is how Total typically decides between a sink repair and a full replacement. Above all, we walk you through the call before starting any work.
- Sink repair is better when: the basin is sound, the leak is at a fitting (supply line, p-trap, shut-off, faucet cartridge), and the sink and faucet are still the style and finish you want. Also when the drain assembly or strainer basket is the only worn component.
- Sink replacement is better when: the basin is cracked through, the sink is corroded (common on old enameled cast iron), the countertop is being remodeled anyway, or you’re switching styles (drop-in to undermount, single-basin to double-basin, or vice versa).
- Faucet-only replacement is better when: the faucet body is old enough that replacement cartridges are no longer available, the finish has failed (peeling chrome, corroded brushed nickel), or you’re upgrading to a pull-down sprayer or touchless model but the sink itself is fine.
How Total Handles Sink Calls
Overall, there are four common paths for a sink call.
Sink Repair
Reseal p-trap, replace supply lines, fix shut-off valves, swap strainer basket. Typically a same-visit call.
Faucet Swap
Cartridge replacement or full faucet install. Moen, Delta, Kohler, Grohe, and other brand parts on the truck.
Drain & P-Trap
Rebuild the drain assembly, replace p-trap and tailpiece, clear slow drains and biofilm buildup.
New Sink Install
Full sink swap or first-time install for kitchen, bath, or utility.
Sink and faucet repairs are covered under a Total Home Service Warranty
Florida’s only local, in-house home service plan. Plumbing repairs (including sink and faucet repairs) covered under one flat annual price. No trip charges, no co-pays, unlimited service calls, and the same in-house Total plumbers you’d see on every other call.
- Faucet washers, cartridges, and repair kits
- Unlimited service calls
- In-house Total plumbers only
- No trip charges, no co-pays
Family-owned South Florida since 1970. Full home coverage (plus electrical + appliances) available on the higher tier.
Sink Repair & Installation FAQ
Sink Repair Cost & Diagnosing Common Issues
How much does a sink repair cost?
Every sink call is different, so pricing is quoted on site rather than published up front. For example, a faucet cartridge swap or a p-trap reseal is at the low end. However, a full sink or faucet replacement is mid-range. Meanwhile, a countertop-coordinated new sink install (undermount, farmhouse) is a larger project. Call (954) 900-6767 for an honest range for your situation, or schedule a visit for a written, flat-rate quote.
My sink is leaking under the cabinet. Where’s it coming from?
In fact, most under-sink leaks come from one of four places. First, a supply-line washer under the faucet handle. Second, a p-trap slip nut that has worked loose. Third, a shut-off valve at the wall. Fourth, a strainer basket seal at the bottom of the sink basin. In practice, we pressure-test to isolate the source, then replace only the failed component. Additionally, if the base cabinet already has water damage, we flag it so it can be addressed alongside the plumbing fix.
My kitchen faucet is dripping. Can it be repaired instead of replaced?
In most cases, yes. The mainstream faucet brands (Moen, Delta, Kohler, Grohe) use replaceable cartridges, o-rings, and seats. As a result, a cartridge swap generally solves the drip for a fraction of a full faucet cost. However, if the faucet body is very old, the finish has failed, or replacement cartridges are no longer available, a full faucet swap makes more sense.
Sink Lifespan & When to Replace
How long does a sink last?
Overall, most residential sinks last between 15 and 30 years depending on the material. In general, stainless steel and granite composite kitchen sinks tend to have the longest lifespan. By contrast, porcelain and enameled cast iron sinks last a long time cosmetically but can chip or crack. Meanwhile, faucets typically need cartridge service every 5 to 10 years and full replacement every 15 to 20 years in South Florida (hard water accelerates cartridge wear).
Should I repair or replace my sink?
As a rule of thumb: if the basin is sound and the problem is a fitting (supply line, p-trap, shut-off, faucet cartridge), repair. On the other hand, if the basin is cracked through, corroded, or the countertop is being remodeled anyway, replacement usually makes more sense than repair. Above all, we walk you through the call before starting any work, so the choice is yours.
New Sink Installations & Special Situations
Can you install a sink I bought myself?
Absolutely. In fact, homeowner-supplied sinks and faucets are common, especially with kitchen remodels and Amazon or online orders. In practice, we install what you bought, but flag any warranty implications (some manufacturers require an authorized installer for the warranty to hold). In addition, if the sink or faucet is missing hardware, we source or bring standard-fit replacements.
Do you handle undermount and farmhouse sink installs?
Yes, we handle both. Undermount and farmhouse (apron-front) sinks require careful coordination with the countertop and cabinet, since the sink is mounted from below or set into a cabinet cutout. In practice, if your countertop is already cut for the new sink profile, we handle the plumbing side; if the cutout still needs to be modified, we coordinate with a countertop fabricator. Meanwhile, drop-in and standard undermount installs finish same-day.
My sink drain smells bad. What causes that?
Typically one of two things. First, a dried-out p-trap in a rarely-used sink (guest bath, second-floor utility). As a result, the water seal in the trap evaporates and sewer gas rises up into the room. In this case, simply running water for a minute refills the trap and stops the smell. Second, biofilm buildup on the drain walls, which generally needs a professional cleaning to remove.
Service Areas & Home Service Warranty Coverage
Do you install sinks in condos and HOA communities?
Of course. Sink installs and repairs are, in fact, one of the most common calls we run in South Florida condos and HOA-managed properties. In practice, Total coordinates with property management on shutoff scheduling and any required permits, and completes the work under our in-house Florida plumbing license.
Is sink repair covered under Total’s Home Service Warranty?
Yes indeed. Sink repairs, faucet cartridge swaps, p-trap resets, shut-off valve replacements, and slow-drain clears on your sink lines are all covered under Total’s Home Service Warranty. However, full sink or faucet replacement (equipment purchase) is a separate cost. Additionally, plan members get priority scheduling on new install work. See the Home Service Warranty pricing page for full details.
Areas We Service
Sink repair, faucet swaps, and full sink installation across Miami-Dade, Broward, and South Palm Beach County. Click any city page to learn more about our services within the area.
Miami-Dade County
- Aventura
- Bal Harbour
- Coral Gables
- Cutler Bay
- Doral
- Hialeah
- Homestead
- Kendall
- Miami
- Miami Beach
- Miami Gardens
- Miami Lakes
- North Miami
- North Miami Beach
- Pinecrest
- Sunny Isles Beach
- Surfside
Broward County
- Coconut Creek
- Cooper City
- Coral Springs
- Davie
- Deerfield Beach
- Fort Lauderdale
- Hallandale Beach
- Hollywood
- Margate
- Miramar
- Pembroke Pines
- Plantation
- Pompano Beach
- Sunrise
- Tamarac
- Weston