
Home / Plumbing Services / Showers & Bathtubs
Shower and Bathtub Fixture Repair in South Florida
Leaky valves, dripping tub spouts, low pressure, and clogged shower drains. Total handles the plumbing side: valves, cartridges, spouts, trim, and drains. In-house licensed plumbers on every call.
Shower and tub valve repair, cartridge swaps, and drain clears across South Florida
A shower that won’t get hot, a tub spout that dribbles instead of streams, and/or a drain that pools water at your ankles are some of the most common plumbing calls we run. In most cases the fix is a cartridge, a diverter, or a p-trap clear. Total’s plumbers arrive with parts for the mainstream valve brands frequently in stock, so most calls finish on the first visit. Above all, Total handles the plumbing side only: valves, cartridges, spouts, trim, drain assemblies, and hidden-leak repair. Tub, shower pan, and enclosure replacement fall under general remodeling, not plumbing; we handle the plumbing side once your general contractor has the fixture and surround set.
What’s Wrong With Your Shower or Bathtub Fixture?
Below, you’ll find the everyday shower and bathtub fixture problems we fix, the valve brands we stock, and above all, how Total decides between a cartridge repair and a full trim or valve replacement. Additionally, we make the scope of what we handle vs. what falls outside our plumbing license clear up front.

What Total Handles on a Shower or Tub Call
Total is a licensed plumbing contractor (CFC1432410). As a result, our scope on a shower or tub call covers everything on the plumbing side. However, the tub, shower base, tile surround, and glass enclosure themselves fall under general remodeling, not plumbing. In practice, we handle the wet side; the fixture and surround are handled by a general contractor.
✓ We handle
- Shower and tub valve repair (cartridge, seals, diverter)
- Tub spout replacement
- Shower head, handle, and trim kit swaps
- Drain assembly and p-trap rebuild
- Shower and tub drain clearing
- Hidden leak diagnosis behind the wall
✗ We don’t handle
- Bathtub replacement (any material)
- Shower pan or base replacement
- Shower enclosure or surround replacement
- Tile, grout, or waterproofing work
- Glass panel or door install
- Walk-in tub full install (tub itself)
Meanwhile, if your project needs any of the items on the right, Total handles the plumbing side (valve rough-in, drain, trim) once your general contractor has the tile, fixture, and surround set.
Common Shower and Bathtub Valve Problems
As a rule, the valve behind the wall is where most shower and tub problems live. Below are the valve-related issues we fix most often, and generally what’s driving them.
Typically a worn or blocked pressure-balance cartridge, or the anti-scald limit stop set too conservatively. In practice, both are a same-visit fix once the correct cartridge is on-site.
Usually a failed cartridge, o-ring, or diverter valve. Fortunately, most brand-name valves take a replaceable cartridge, so a rebuild is often cheaper than swapping the whole valve body.
Often a clogged shower head (mineral buildup), a partially blocked cartridge, or a whole-home pressure issue. As a rule, we start at the shower head and work upstream from there.
Almost always a worn diverter inside the tub spout. In most cases, we swap the entire tub spout since diverter-only rebuilds are usually more effort than they’re worth.
Shower Drain, Tub, and Leak Problems
Meanwhile, some shower and bathtub calls have nothing to do with the valve and everything to do with the drain, the tub itself, or a hidden leak behind the wall. Below are the fixture-side issues we see and the fixes we generally recommend.
Almost always hair, soap scum, and biofilm caked in the p-trap or branch drain. In practice, a cable snake handles most cases; see our drain cleaning page for related issues.
A leak in the shower pan, the drain assembly, or the valve rough-in behind the wall. In these cases, we open only what’s needed to isolate the source. Additionally, see our leak detection page for what’s involved.
Usually biofilm buildup on the drain walls or a dried-out p-trap in a rarely-used bathroom. In practice, running water through the trap or a professional drain cleaning handles most cases.
Shower and Tub Valve Brands We Repair and Install
Total repairs and installs every shower and tub valve brand. In practice, we keep parts and full valve trims for the most-common brands frequently in stock so most cartridge swaps and trim replacements finish same-day. Meanwhile, anything less common is a quick special-order.
Frequently in stock
Special-order or bring-your-own
Not sure which valve brand you have behind the wall? As a rule, we can identify it on-site from the trim plate, handle style, or cartridge shape and match parts to what’s already installed.
Shower & Tub Cartridge Repair vs Full Trim Replacement
In general, most shower valve cartridges need service every 5 to 10 years in South Florida (hard water accelerates cartridge wear), and the valve body behind the wall lasts 15 to 25 years. Below is how Total typically decides between a cartridge repair and a full trim or valve swap. Above all, we walk you through the call before starting any work.
- Cartridge repair is better when: the valve body is under 15 years old, the leak is at the cartridge or seal, and replacement cartridges for the model are still available. Also when it’s a diverter, o-ring, or anti-scald limit-stop issue rather than a valve body failure.
- Full trim replacement is better when: the visible trim (handle, tub spout, shower head, trim plate) has failed or the finish has worn but the valve rough-in behind the wall is fine. In these cases we swap the trim kit and leave the rough-in in place, keeping the project small.
- Full valve rough-in replacement is better when: the valve body itself is corroded, cartridges for the model are no longer manufactured, or the whole valve is 20+ years old and failing. This requires opening the wall behind the shower.
- Not in Total’s scope: replacing the tub, shower pan, tile surround, or glass enclosure. That’s a remodeling project. However, once your general contractor has the fixture and surround set, we handle the plumbing side of the remodel (valve rough-in, drain, and trim).
How Total Handles Shower & Bathtub Calls
Overall, there are four common paths for a shower or bathtub call.
Shower Valve Repair
Cartridge swap, o-ring replacement, diverter fix, anti-scald limit stop reset. Typically same-visit.
Tub Valve & Spout Repair
Tub spout diverter swap, cartridge rebuild, handle replacement, and drain assembly reset.
Fixture & Trim Swap
Shower head, tub spout, handle, and trim plate replacement. Rough-in stays in place.
Shower & Tub Drain Repair
P-trap rebuild, drain assembly reset, slow-drain clears, and biofilm removal on shower and tub lines.
Shower and bathtub repairs are covered under a Total Home Service Warranty
Florida’s only local, in-house home service plan. Plumbing repairs (including shower and bathtub repairs) covered under one flat annual price.
- Faucet cartridges and repair kits
- Unlimited service calls
- In-house Total plumbers only
- No trip charges,
no co-pays
Family-owned South Florida since 1970. Full home coverage (plus electrical + appliances) available on the higher tier.
Shower & Bathtub Repair FAQ
Shower Repair Cost & Diagnosing Common Issues
How much does a shower repair cost?
Every shower and tub call is different, so pricing is quoted on site rather than published up front. For example, a cartridge swap or a drain clear is at the low end. However, a full valve rough-in replacement (opening the wall) is mid-range. Meanwhile, a full fixture and rough-in swap is a larger project. Call (954) 454-6801 for an honest range for your situation, or schedule a visit for a written, flat-rate quote.
My shower won’t get hot. What’s wrong?
In fact, this is one of the most common shower calls we run. Typically the pressure-balance cartridge inside the valve has worn or clogged, or the anti-scald limit stop is set too conservatively. In practice, both are same-visit fixes once the right cartridge is on-site. Additionally, if the whole house has hot-water issues, we check the water heater side as well.
My tub spout drips after I turn the shower on. Why?
Almost always a worn diverter inside the tub spout itself. As a result, water bypasses the diverter and drips out the spout instead of streaming from the shower head. In most cases, we swap the entire tub spout since diverter-only rebuilds are usually more effort than they’re worth.
Shower & Tub Lifespan and Replacement
How long does a shower valve last?
In general, most shower valves last 15 to 25 years depending on brand, water hardness, and use. Meanwhile, cartridges and diverters inside the valve typically need service every 5 to 10 years in South Florida (hard water accelerates cartridge wear). Above all, when the valve rough-in itself corrodes or parts stop being available, the whole valve is due for replacement.
Should I repair or replace my shower or tub?
As a rule of thumb: if the valve is under 15 years old, the fixture surround is sound, and the issue is at a cartridge or trim piece, repair. On the other hand, if the fixture is cracked through, the surround has failed, or the bathroom is being remodeled anyway, replacement usually makes more sense than repair. Above all, we walk you through the call before starting any work.
Scope: What Total Does and Doesn’t Handle
Do you replace bathtubs or shower pans?
No, we don’t. As a licensed plumbing contractor, Total’s scope on a shower or tub call covers the plumbing side: valves, cartridges, tub spouts, shower heads, handles, trim kits, and drain assemblies. However, replacing the tub itself, the shower pan or base, the tile surround, or the glass enclosure is a general remodeling project. In practice, once your general contractor has the fixture and surround set, we handle the plumbing side (valve rough-in, drain, trim).
Do you handle tile-surround and glass-enclosure work?
No, the tile, waterproofing, grout, and glass panels themselves are outside Total’s plumbing license and scope. However, on a tile-surround or glass-enclosed shower project, Total handles the plumbing side: the valve rough-in behind the wall, the drain assembly, and the final trim install. In practice, we coordinate directly with your tile setter or glass company on scheduling.
Can you install a shower head, tub spout, or trim kit I bought myself?
Absolutely. In fact, homeowner-supplied shower heads, tub spouts, handles, and trim kits are common. In practice, we install what you bought, but flag any warranty implications (some manufacturers require an authorized installer for the warranty to hold). Additionally, if the fixture is missing hardware, we source or bring standard-fit replacements.
Do you install walk-in tubs or accessibility tubs?
No, the tub itself is outside our scope. However, if you or a contractor is having a walk-in or accessibility tub installed, Total can handle the plumbing side: the supply and drain rough-in, the valve and trim install, and any diverter or handheld shower connection. Meanwhile, the tub install itself, the framing, and any tile or flooring around it are handled by your GC.
Service Areas & Home Service Warranty Coverage
Do you service shower valves and tub fixtures in condos and HOA communities?
Of course. Shower valve service, tub faucet swaps, cartridge replacements, and drain work are, in fact, some of the most common calls we run in South Florida condos and HOA-managed properties. In practice, Total coordinates with property management on shutoff scheduling and any required permits, and completes the fixture-side work under our in-house Florida plumbing license. However, if the project also involves replacing the tub, shower pan, or enclosure itself, that’s outside our scope and would need coordination with a general contractor.
Is shower and bathtub fixture repair covered under Total’s Home Service Warranty?
Yes indeed. Shower valve rebuilds, tub spout diverter swaps, cartridge replacements, and slow-drain clears on your shower and tub lines are all covered under Total’s Home Service Warranty. However, a couple of items fall outside coverage. First, a full trim kit or valve rough-in replacement (equipment purchase) is a separate cost, though warranty members get priority scheduling on fixture install work. Second, tub, shower pan, enclosure, tile, and glass work are outside Total’s plumbing scope entirely, those are remodeling projects and would need a general contractor. See the Home Service Warranty pricing page for full details.
Areas We Service
Shower and bathtub fixture repair, valve replacement, and trim installation across Miami-Dade, Broward, and South Palm Beach County. Click any city page to learn more about our services within the area.
Miami-Dade County
- Aventura
- Bal Harbour
- Coral Gables
- Cutler Bay
- Doral
- Hialeah
- Homestead
- Kendall
- Miami
- Miami Beach
- Miami Gardens
- Miami Lakes
- North Miami
- North Miami Beach
- Pinecrest
- Sunny Isles Beach
- Surfside
Broward County
- Coconut Creek
- Cooper City
- Coral Springs
- Davie
- Deerfield Beach
- Fort Lauderdale
- Hallandale Beach
- Hollywood
- Margate
- Miramar
- Pembroke Pines
- Plantation
- Pompano Beach
- Sunrise
- Tamarac
- Weston